We specialize in rubber compound design based on all commercially available ruber material including NATURAL RUBBER,SBR , EPDM, NEOPRENE, NITRILE,HNBR,BUTYL ,HYPALON, SILICON,VITON,POLYURETHANE,THERMOPLASTIC RUBBER,etc.

We are in compliance with international standards like SAE, ASTM, BS, DIN, JIS as well as customer specifications.

We offer a wide range of rubber sheets custom model products & coated fabrics according to customer specification by using calender m/c.we use only the finest quality of raw materials available.

These include polymer like NATURAL RUBBER, STYRENE BUTADIENE RUBBER , POLY BUTADIENE RUBBER, CHLOROPRENE, ACROLO NITRILE BUTADIENE RUBBER, EPDM, BUTYL RUBBER, HYPALON, & SILICON RUBBER.

We manufacture and supply exceptional variety of hoses that are highly demanded for various automobile, industrial and commercial purposes. keeping the demands of our clients in mind, we are offering hoses in different types such as straight, elbows, straight reducer, elbow reducer with & without polyster fabric /reinforcement etc for RADIATOR, BRAKE, HEATER, SUCTION, TURBO CHARGER, ENGINE, OIL, WATER, AIR, FILTER. These includes polymers like NATURAL RUBBER (NR), STYRENE BUTADIENE RUBBER (SBR), POLY BUTADIENE RUBBER (BR), CHLOROPRENE (NEOPRENE, CR), ACROLO NIT RILE BUTADIENE RUBBER (NBR), EPDM, BUTYL RUBBER, HYPALON AND SILICON RUBBER.

Silicon Hoses

Suitable for cooling systems, charge air systems and induction systems. With its temperature range Stability, Flexibility, Longevity, Thermal, and Electrical Insulation Properties, Silicon Polymers are a modern miracle of engineering material science.Manufactured from premium quality raw material, silicone hoses are used for high performance applications such as turbochargers. These hoses can withstand wide temperatures ranging from -40°c to 300°c.

Plane Hoses With & Without Reinforcement

Produced from EPDM /NT/NEO/VITON/ECO/ACM/PVC to withstand temp up to 200°c.the reinforcement can vary depending on temperature & pressure requirement. The reinforcement can be REYON,POLYSTER,COTTON. The inner tube & outer cover material may vary for (ex: Inner Nitrile & Outer Neoprene ). Hoses are commonly used in Radiator & Engine Application.

Molded Hose

Asean Rubber provides its customers engineered solutions for molded hoses for applications across various industries. Asean Rubber Molded hoses are custom designed for each applications factoring in hose path, pressures or vacuums and environmental factors to ensure performance specifications are met. These hoses are specifically designed and manufactured in a wide range of materials and configurations depending on the function of the hose. Asean Rubber knowledgeable staff has extensive experience in helping select the right materials needed to meet customer specifications. Asean Rubber molded hoses are manufactured to a specific configuration and shape based on the hoses path.

Wire Embedded Hose / Wrapping Hose

Hoses required for Suction & Discharge application & greater flexibility than standard hose. Any critical profiles which cannot be manufactured with smooth outer cover process, are manufactured by this process. Steel wire spiral is used for reinforcement. These hoses are made from an oil & weather resistance compound.

Rubber molded products are especially designed to meet stringent international standards of quality. the rubber moulded products like O Rings, Bushes, Anti Vibration Mounting Flaps, Bridge Bearing Pads, Seals, Packing, Oil Seals, Diaphragms, Boots, Grommets, all types of Filter Rubber Parts, Metal Bonded items and any precision items from Natural and Synthetic Rubbers, Special Elastomers like Silicon, Viton, Polyurethane, Butyl, Hyplaon. Our rubber moulded products are offers resistance to Pressure, Ozone, Weathering, Heat, Flex Cracking.

Extruded item is exceptionally designed to provide an efficient performance. The rubber extruded items like Gasket, Seal Cover, Sponge Gasket, Sleeve, Tubing, Beading manufactured from NT/EP/NEO/SIL/NR POLYMER and Supplied by the company are offered in various sizes as per customer specification. For Railways, Defence, Industrial Equpment, Automobile, Construction Equipment.

We supply high quality plastic component by using STYRENE, ABS, POLYSTER, NYLON, ACRYLIC, EPDM, PP we manufacture these components using high grade plastics procured from our trusted vendors. we provide a wide area choice to our clients & we offer these components as per customer specification.

We manufacture & supply metal tubes with & without hose pipe clamps for various applications in Automobiles, Ships, Construction Equipment and Agricultural Sector. These are fabricated using high grade materials, which impart almost level of durability & manufactured from superior quality of raw material.

Asean Rubber manufactures custom-build rubber rollers to suit your needs. We manufacture all types of custom rubber rollers. We also repair and engineer new roller cores and sleeves to your requirements.

Rubber Rollers are built using the latest extruder technology. Asean Rubber is engaged in manufacturing rollers in both Natural as well as all Synthetic Rubber.

The requirements for each industry vary significantly from customer to customer and industry to industry. Our team is well versed in the requirements of all types of applications for all types of rollers.

These rubber rollers are made using optimum quality of polymers and are fit to be used in steel, paper, textile, printing, plastic, tanneries and other allied industries in diverse specifications.

An O-ring is a doughnut-shaped object, or torus. The opposite sides of an O-ring are squeezed between the walls of the cavity or "gland" into which the O-ring is installed. The resulting zero clearance within the gland provides an effective seal, blocking the flow of liquids or gases through the gland's internal passage.

We are manufacturing a wide range of Silicon O Ring custom model products according to customer specification. we use only the finest quality of raw materials to create a quality of Product.

An O-ring is a doughnut-shaped object, or torus. The opposite sides of an O-ring are squeezed between the walls of the cavity or "gland" into which the O-ring is installed. The resulting zero clearance within the gland provides an effective seal, blocking the flow of liquids or gases through the gland's internal passage.

We are manufacturing a wide range of Nitrile O ring custom model products according to customer specification. we use only the finest quality of raw materials to create a quality of Product.

An O-ring is a doughnut-shaped object, or torus. The opposite sides of an O-ring are squeezed between the walls of the cavity or "gland" into which the O-ring is installed. The resulting zero clearance within the gland provides an effective seal, blocking the flow of liquids or gases through the gland's internal passage.

A bellows or pair of bellows is a device constructed to furnish a strong blast of air. The simplest type consists of a flexible bag comprising a pair of rigid boards with handles joined by flexible leather sides enclosing an approximately airtight cavity which can be expanded and contracted by operating the handles.

A bushing or rubber bushing is a type of vibration isolator. It provides an interface between two parts, damping the energy transmitted through the bushing. A common application is in vehicle suspension systems.

An anti-vibration mounting is a flexible support for an engine that reduces the amount of noise and vibration that passes to the vehicle chassis. A highly important function of an anti-vibration mounting is to reduce noise.Isolating engine vibrations from the main body of the car is usually achieved by the use of rubber anti-vibration mountings.Systems where rubber is bonded to metal are the most common types of anti-vibration mountings.

An elastomeric bridge bearing is a commonly used modern bridge bearing. There are several different similar types of bridge bearings that include neoprene bearing pads, neoprene bridge bearings, laminated elastomeric bearings and seismic isolators, which are all generally referred to as bridge bearing pads in the construction industry.

An O-ring, also known as a packing, or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.

Sponge Rubber Gasket is soft and porous in nature. Our range of gaskets are known for excellent strength, elasticity and abrasion resistance. Sponge Gaskets are Customized as per client requirements.

Rubber Diaphragms are resistant to a variety of media at different pressure. It's function is to fulfill switch, control, valve, pump and accumulator functions. The offered diaphragms ensure high strength to the equipment or tool.

In an oil seal environment there is a shaft that is rotating inside a housing or bore. Because of friction, there must be some clearance between the shaft and the bore. The function of the oil seal is to stop whatever fluid is inside from leaking out the clearance between the shaft and housing. The seal may also be used to prevent outside materials, such as dirt, from moving in through the clearance.

A Rubber buffer also known as rubber-metal buffer is used in industry mainly to absorb kinetic energy and belong to the product family Dampening elements. They are especially important by repeat impact forces and rapidly moving parts with end stops. Rubber buffers from norelem help to reduce vibrations on machines and give a sprung mounting. Rubber buffers are often used as mounts for aggregates, as door stops or noise reduction elements.

Rubber breather/PCV grommets are used as a seal between the valve cover and a breather or PCV. You will need the grommet when using any valve cover with a breather or PCV.

One of our strengths lies in the supply of moulded rubber hoses designed to withstand pressure and vacuum loads. They can be used with various media, including air, oil and water. Complicated installation configurations create a need for bend radii that can only be achieved with moulded hoses.

Extruded Rubber Is Rubber That Has Been Shaped Through A Process Known As Extrusion. During The Extrusion Process, Rubber Is Passed Through A Heated Drum That Melts The Rubber And Puts It Under Pressure, Forcing It Into A Die.

sponge sealing cords are cords manufactured from lightweight (microporous) rubber. The diameter of the sponge sealing cord is expressed by the diameter of the cord in mm. Extruded sealing cords are where necessary soft, pliable and elastic, and have a relatively low weight even with large diameters. Sponge sealing cords are designed for operating temperatures from -30 °C up to +80 °C.

These hoses are used in cylinders and tanks to regulate gas and liquid materials. Our skilled agents procure these hoses from the most authentic vendors of the market.

We are manufacturing a wide range of Sponge Rubber Beading custom model products according to customer specification. we use only the finest quality of raw materials to create a quality of Product.

A fuel line is a hose used to bring fuel from one point in a vehicle to another or from a storage tank to a vehicle. It is commonly made of reinforced rubber to prevent splitting and kinking.

A hose is a flexible hollow tube designed to carry fluids from one location to another. Hoses are also sometimes called pipes (the word pipe usually refers to a rigid tube, whereas a hose is usually a flexible one), or more generally tubing. The shape of a hose is usually cylindrical

EPDM rubber a type of synthetic rubber, is an elastomer characterized by a wide range of applications. The M refers to its classification in ASTM standard D-1418; the M class includes rubbers having a saturated chain of the polymethylene type. Dienes currently used in the manufacture of EPDM rubbers are dicyclopentadiene (DCPD), ethylidene norbornene (ENB), and vinyl norbornene (VNB). EPDM rubber is closely related to ethylene propylene rubber: ethylene propylene rubber is a copolymer of ethylene and propylene, whereas EPDM rubber is a terpolymer of ethylene, propylene, and a diene-component.

We supply silicon braided hoses that are appreciated for its high strength. Our silicon braided hoses are available in 3mm to 25mm bore sizes in coils up to 25 to 50m.

We are manufacturing a wide range of Vamac Hoses custom model products according to customer specification. we use only the finest quality of raw materials to create a quality of Product.

Heater hoses are rubber hoses found on virtually all vehicles equipped with internal combustion engines. Their main purpose is to transport coolant from the engine to the heater core located inside of the vehicle. They are often premolded into specific shapes, or cut to specific lengths in order to accommodate the setup of the vehicle’s cooling system. They are usually located at the rear of the engine, near the firewall, connected to the heater core outlets, or the heater control valve. Automotive cooling system hoses are made of heavy duty materials, and are designed to withstand exposure to the heat and chemicals of the engine’s coolant.

The power steering hose connects the power steering pump to the cylinders that enables a vehicle to turn left and right easily. Also known as the power steering pump or PS pump, it takes a pressurized power steering fluid right into the steering rack and uses it to control a steering wheel's rate of turn.

Hydraulic hose is specifically designed to convey hydraulic fluid to or among hydraulic components, valves, actuators, and tools. It is typically flexible, often reinforced and usually constructed with several layers of reinforcement since hydraulic systems frequently operate at high or very high pressures.

Polytetrafluoroethylene (PTFE) is an engineered fluoropolymer. Oustanding resistance to chemicals is one of its primary attributes. A broad temperature range of -100°F to 500°F (-73°C to 260°C) make this hose material suitable for the majority of fluid and ambient temperature conditions found in industry. An extremely low coefficient of friction, (0.05 to 0.20), provides a non-stick surface. Water absorption of PTFE is negligible, less than 0.01% by ASTM test, and it is FDA-approved for food and pharmaceutical use. Additionally PTFE will withstand flexing and vibration without failure from flex fatigue. PTFE is chemically inert, it will not break down or deteriorate in service and it has an unlimited shelf life because properties do not change with age or exposure to weather.

We are manufacturing a wide range of Metal Pipe Bending and Ferrule Assembly custom model products according to customer specification. we use only the finest quality of raw materials to create a quality of Product.

We are manufacturing a wide range of Flexible Hoses and Assembly custom model products according to customer specification. we use only the finest quality of raw materials to create a quality of Product.